ELECTRIC CONTROLLERS & LEADS & CUP HOLDERS
2 BUTTON OKIN TYPE CONTROLLER - STRAIGHT 5 PIN PLUG OR RIGHT ANGLE
The right-angle plug type with a 5-pin connector will be dispatched unless a different request is made..
This controller is now available with various plug options for the 'Quick Connect' setup (refer to pictures). If you prefer this over the right-angle plug controller, please select the Quick Connect option.
This is a replacement CARECO 4 button controller.
5pin straight plug
This is a MiBed type 6 button controller for bed motors.
guaranteed compatible with MiBed dual motors and other bed motors
It has 6 buttons and a 5pin right angle plug.
This is a 4/6 button replacement handset for CIAR/NATUZZI 2 motor systems. It has a 6 contact telephone type plug connection.
PLEASE CHECK THE NUMBER OF CONTACTS ON YOUR REMOTE PLUG BEFORE ORDERING.
This is a genuine EMOMO heat and massage replacement kit including the controller. NHX0347H
(available as special order if out of stock - please ring 02380 555986)
This is a genuine EMOMO 2 button round switch EP10 with USB slot and LED
This is a replacement for the EMOMO 20J switch ONLY - not compatible with other EMOMO controllers
20J - WITH LED
USB slot
This is a replacement for the EMOMO 20LR(U) switch ONLY - not compatible with other EMOMO controllers
20LR(U) - BLUE LED
USB slot
This is a replacement for the EMOMO 20LRHW switch ONLY - not compatible with other EMOMO controllers
20LKRHW - WHITE LED
USB slot
This is a KAIDI 2 rocker button controller KDH120-005
It has a USB slot and 1x5 pin straight plug connector
This is an EMOMO 2 rocker button 2 motor controller E90BBU with USB slot.
It has a 5pin right angle connector. available with either Grey or Golden bezel
This is an EMOMO 2 rocker button 2 motor controller HX90 with USB slot.
It has a 5pin straight connector. 2 models available - both will work but for an exact replacement match the bar code on your controller (HUN or HU)
This is an EMOMO 2 rocker button single motor controller HXAFU with USB slot.
It has a 5pin straight connector.
This is an EMOMO 2 MOTOR ADAPTER LEAD. It connects the controller buttons, power supply and motors.
2 styles available
5 pin din socket with 2x5pin din plugs for the motors and 1x2 pin plug for the power supply or
5 pin din socket with 2x2pin sockets for the motor connections and 1x2pin plug for the power supply
This is a KAIDI 5 button control with USB slot
It has a 5pin connector
This is a KAIDI 2 button control KDH126-001. It has an RJ11 type plug
For height adjustable desks.
This is a replacement OKIN handset extension lead. It runs from the handset plug to the motor connection.
2 motor lead = 0.25m length
1 motor lead = 1.5m length
This is a Y lead to connect 2 motors from 1 transformer. 1 plug (flat pin and round pin) and 2 sockets
span is 1.7m and 260mm to splitter.
This is an Emomo 2 motor cup holder with cooler function and LED strip (use optional!) complete with control box.- NOTE - you should fit both the cup holder and control box together as either may not be a compatible replacement on their own for your existing cup holder or control box.
1 silver bezel.
This is an Emomo 2 motor cup holder with cooler function complete with control box and power supply.
It has a Black bezel -
Either the cup holder, power supply or the control box can be used separately as replacements for a faulty item.
This is a complete kit for the Emomo single motor cup holder
Cup Holder
Control Box
Power supply and mains lead
LED strip
NO cooling function.
This is an Emomo SINGLE motor Q-CUP holder with cooler function and wireless charging - complete with control box and power supply. It has a single socket for motor connection.
.