MOTORS (Actuators)

24V actuator with a 13" (330MM) stroke 22" approx. overall length This actuator has 2 leads. 1 for the transformer and a 1 with a 5pin socket for the handset plug.

THIS IS AN 8" STROKE ACTUATOR. IT HAS 2 LEADS - 1 WITH 5PIN SOCKET FOR THE CONTROLLER AND 1 WITH A 2 PIN PLUG FOR THE TRANSFORMER CONNECTION. OVERALL DIMENSIONS - CLOSED 17.5" (445MM) - FULLY EXTENDED 26" (660MM) *PLEASE CHECK DIMENSIONS BEFORE ORDERING

THIS IS A GENUINE REPLACEMENT CIAR N500091494 ACTUATOR IT HAS 1 2PIN SOCKET CONNECTION.

THIS IS A GENUINE REPLACEMEN CIAR N500092162 ACTUATOR It has 1 lead with a 2 pin plug.

THIS IS A GENUINE REPLACEMENT CIAR N500091712 ACTUATOR IT HAS 1 2 PIN CONNECTION

This is a TiMotion TA6 series actuator. 3500N . Part No TA6-1151-002. It has a single lead with a 2 pin plug (1 flat - 1 round)

This is a TiMotion TA6 series actuator. 6000N . Part No TA6-1002-014. It has a single lead with a 6 pin plug some slight markings from storage DIMENSIONS - Closed overall 360MM - Fully open 485MM - Stroke 125MM

This is a TiMotion TA14 series actuator. 6000N . Part No TA14-1074-001. It has a 2 sockets - 1 for the 5 pin plug from the handset and 1 2 pin for the transformer connection. (1 flat pin and 1 round pin) DIMENSIONS - Closed overall 400MM - Fully open 600MM - Stroke 200M It has a few storage scuff marks.

THIS IS A KD ACTUATOR KDYJT013-04. 29V IT HAS A SINGLE LEAD WITH A 2 PIN PLUG FOR THE POWER SUPPLY. IT HAS A 334MM STROKE. 1000N

THIS IS A KD ACTUATOR KDYJT006-20. 29V IT HAS A LEAD WITH A 2 PIN PLUG FOR THE POWER SUPPLY AND A 5 PIN SOCKET FOR THE CONTROLLER IT HAS A 250MM STROKE

This is a KDPT005-90 Actuator with a 330MM stroke. It has 2 leads - 1 5 pin socket for the controller and 1 2 pin plug for the power supply. 4 bolt mounting. - available with leads exiting either end.

This is a LIMOSS MD120 actuator with a 260mm stroke. It has one lead for the 2 pin transformer connection and one 5 pin socket for the controller. Some surface markings from storage. DIMENSIONS: Closed (end to end) 460mm Fully open 720mm.

This is a LIMOSS MD125 actuator with a 300mm stroke. It has 2 leads - 1 for the 2 pin transformer connection and one 5 pin socket for the controller.

28V actuator with a 13" (330MM) stroke

THIS IS A SET OF  ACTUATOR MOUNTING BRACKETS WITH  BOLTS.