Okin - vat exclusive prices

A 2 button oval shaped controller for electric recliner chairs.

This is a replacement 2 button controller for electric recliner chairs and sofas. It has a 5 pin DIN plug and comes complete with a replacement outer bezel - available with or without centre indicator light. MLSK14

This is a 2m length extension lead for electric recliners. It is suitable for the 2 pin type plug (1 round and 1 flat pin)

This is a 3.5m length extension lead for electric recliners. It is suitable for the 2 pin type plug (1 round and 1 flat pin)

This 4 button controller has a centre USB charging slot. It does not have an indicator light.  DIMENSIONS 4.5" x 1.75" and 1.5" deep. (115x48mm and 40mm deep) 5 pin straight plug connector Complete with replacement outer bezel

An illuminated 4 button controller for 2 motor electric recliner chairs. - Okin wired

A 4 button oval shaped controller for 2 motor electric recliner chairs. - Okin wired

8 pin handset socket with an 8pin yellow banded straight plug

This lead is for OKIN systems where the actuator has no direct connection for the handset.

This is a MiBed type 6 button controller for bed motors.

guaranteed compatible with MiBed dual motors and other bed motors

It has 6 buttons and a 5pin right angle plug.

This lead connects to a standard 2 pin type power supply and the DEWERT style 2 V pin connection.

This is a 2550ma Li-Ion battery pack for recliners without the need to permanently connect to a mains supply. Can be used with KAIDI/LIMOSS/RMT/OKIN/EMOMO and other motors that have a 2pin connection for the power lead. It has a 2pin input and will charge from any 2pin 29v type transformer. 100-150 cycles at least before the need to recharge.

This is a direct replacement for the standard OKIN style 2 button round switch but has the added benefit of a USB charging slot for tablets, mobiles etc. It has a right angle 5pin plug and has no box for the USB electrics these are incorporated behind the buttons. It has a switch also so motor travel can be reversed.

This is an OKIN compatible 4/6 button replacement controller for electric recliner chairs and recliner sofas. It has a 1.5m lead and a 5pin right angle plug with V notch. - Suitable as a replacement for MiBed controllers.

This is a replacement OKIN handset extension lead. It runs from the handset plug to the motor connection.

2 motor lead = 0.28m length - Limited quantity of 1.5m length

1 motor lead = 1.5m length

2 BUTTON OKIN TYPE CONTROLLER - STRAIGHT 5 PIN PLUG OR RIGHT ANGLE

The right-angle plug type with a 5-pin connector will be dispatched unless a different request is made..

This controller is now available with various plug options for the 'Quick Connect' setup (refer to pictures). If you prefer this over the right-angle plug controller, please select the Quick Connect option.

This is a round 2 button illuminated controller for electric recliner chairs. It is available with either a right angle or straight 5 pin plug. Complete with a USB charging slot. Intended as a replacement for the OKIN style round controller. 

This lead will connect the standard OKIN type transformer to a CIAR system - can also be used as an input for battery packs that have the CIAR type socket on the chair.

This is a replacement 2 pin plug with screw terminals

This is a replacement 2 pin socket. It has screw terminals.

This is a round 2 button controller for electric recliner chairs. It has a 5 pin round plug with a V notch and a clip on bezel.

SHERBORNE 3 BUTTON CONTROLLER

8 PIN PLUG

ZINC ALLOY 2 BUTTON OKIN COMPATIBLE CONTROLLER WITH USB CHARGING SLOT.

4 BUTTON OKIN COMPATIBLE ZINC ALLOY METAL CONTROLLER.

This is a Y lead to connect 2 motors from 1 transformer. 1 plug (flat pin and round pin) and 2 sockets

span is 1.7m and 260mm to splitter.